100% RECYCLABLE Tempered glass 2D/3D screen protector
|
FAST FREE
WORLDWIDE
SHIPPING
|
SATISFACTION GUARANTEE |
100% SAFE
PURCHASE
|
100% Recyclable Screen Protector
Made from real 100% recyclable tempered glass it is environmentally the friendliest option to protect your screen and avoid those unwanted repairs after a fall.😉
The amazing thing about a glass screen protector is that it really becomes a part of your screen. After a couple of hours of use, you won't even notice it's there. The feel is far superior to a vinyl or sticker protector.
Package Contents: 1 x Glass Screen Protector,
1 x Wet Dry Wipe,
1 x Dust Removal Sticker
Anti-Scratch, Anti-Shatter
Our glass screen protector adds a super-strong glass layer that is very scratch-resistant. If you are able to scratch the screen, you can just replace the protector, and voila! Brand new screen!
Tempered glass holds together, even when cracked or broken. Our screen protector isn't indestructible, but if your phone experiences a high fall or hard impact, the glass will stay intact. You won't have to worry about glass shards.
⚠ WARNING: Please note that it is not possible to return the glass protector if it was already applied. By ordering, you agree with the stated conditions.
Features
- 100% Recyclable real glass
- FULL-SCREEN PROTECTION
- Amazing scratch protection
- Perfectly transparent
- Easy to apply
- No bubbles
- Ø-plastic packaging
How to Apply
• Wash your hands & dry them with a clean towel.
• Clean the screen. Wipe it with a mild solvent like eyeglass cleaner or rubbing alcohol, which would not risk damage to low quality surrounding finishes.
Rub it dry with a soft cloth and remove as much lint as possible with a blower or by wiping lightly with a lint-free cloth, such as the microfiber wipe which comes with the screen protector.
• Check the placement of the screen protector. Carefully remove it from its packaging. Before you lift its backing, position the screen protector over the screen to see how much margin to leave on each side and ensure clearance of features such as camera spots and microphone holes.
• Remove residual bits of dust with a mild adhesive. Dust is the most important thing to remove from under a screen protector. Lightly dab a sticky note or a dirt clean film all over the screen. Looking at the reflection of a bright area on the screen at an angle will confirm the presence or absence of dust.
• Stick on the screen protector, aligning an edge carefully. Peel back the screen protector's backing from one end (leaving it on the other allows more control by holding that end). Align it with the correct edge of the screen, leaving the margin you determined previously and watching how the alignment of the sides perpendicular to it will fall. Then peel off the entire backing and smooth down the protector.
• Finished! Enjoy your gadget without fear.
|
FAST FREE
WORLDWIDE
SHIPPING
|
SATISFACTION GUARANTEE |
100% SAFE
PURCHASE
|
100% Recyclable Screen Protector
Made from real 100% recyclable tempered glass it is environmentally the friendliest option to protect your screen and avoid those unwanted repairs after a fall.😉
The amazing thing about a glass screen protector is that it really becomes a part of your screen. After a couple of hours of use, you won't even notice it's there. The feel is far superior to a vinyl or sticker protector.
Package Contents: 1 x Glass Screen Protector,
1 x Wet Dry Wipe,
1 x Dust Removal Sticker
Anti-Scratch, Anti-Shatter
Our glass screen protector adds a super-strong glass layer that is very scratch-resistant. If you are able to scratch the screen, you can just replace the protector, and voila! Brand new screen!
Tempered glass holds together, even when cracked or broken. Our screen protector isn't indestructible, but if your phone experiences a high fall or hard impact, the glass will stay intact. You won't have to worry about glass shards.
⚠ WARNING: Please note that it is not possible to return the glass protector if it was already applied. By ordering, you agree with the stated conditions.
Features
- 100% Recyclable real glass
- FULL-SCREEN PROTECTION
- Amazing scratch protection
- Perfectly transparent
- Easy to apply
- No bubbles
- Ø-plastic packaging
How to Apply
• Wash your hands & dry them with a clean towel.
• Clean the screen. Wipe it with a mild solvent like eyeglass cleaner or rubbing alcohol, which would not risk damage to low quality surrounding finishes.
Rub it dry with a soft cloth and remove as much lint as possible with a blower or by wiping lightly with a lint-free cloth, such as the microfiber wipe which comes with the screen protector.
• Check the placement of the screen protector. Carefully remove it from its packaging. Before you lift its backing, position the screen protector over the screen to see how much margin to leave on each side and ensure clearance of features such as camera spots and microphone holes.
• Remove residual bits of dust with a mild adhesive. Dust is the most important thing to remove from under a screen protector. Lightly dab a sticky note or a dirt clean film all over the screen. Looking at the reflection of a bright area on the screen at an angle will confirm the presence or absence of dust.
• Stick on the screen protector, aligning an edge carefully. Peel back the screen protector's backing from one end (leaving it on the other allows more control by holding that end). Align it with the correct edge of the screen, leaving the margin you determined previously and watching how the alignment of the sides perpendicular to it will fall. Then peel off the entire backing and smooth down the protector.
• Finished! Enjoy your gadget without fear.
|
FAST FREE
WORLDWIDE
SHIPPING
|
SATISFACTION GUARANTEE |
100% SAFE
PURCHASE
|
100% Recyclable Screen Protector
Made from real 100% recyclable tempered glass it is environmentally the friendliest option to protect your screen and avoid those unwanted repairs after a fall.😉
The amazing thing about a glass screen protector is that it really becomes a part of your screen. After a couple of hours of use, you won't even notice it's there. The feel is far superior to a vinyl or sticker protector.
Package Contents: 1 x Glass Screen Protector,
1 x Wet Dry Wipe,
1 x Dust Removal Sticker
Anti-Scratch, Anti-Shatter
Our glass screen protector adds a super-strong glass layer that is very scratch-resistant. If you are able to scratch the screen, you can just replace the protector, and voila! Brand new screen!
Tempered glass holds together, even when cracked or broken. Our screen protector isn't indestructible, but if your phone experiences a high fall or hard impact, the glass will stay intact. You won't have to worry about glass shards.
⚠ WARNING: Please note that it is not possible to return the glass protector if it was already applied. By ordering, you agree with the stated conditions.
Features
- 100% Recyclable real glass
- FULL-SCREEN PROTECTION
- Amazing scratch protection
- Perfectly transparent
- Easy to apply
- No bubbles
- Ø-plastic packaging
How to Apply
• Wash your hands & dry them with a clean towel.
• Clean the screen. Wipe it with a mild solvent like eyeglass cleaner or rubbing alcohol, which would not risk damage to low quality surrounding finishes.
Rub it dry with a soft cloth and remove as much lint as possible with a blower or by wiping lightly with a lint-free cloth, such as the microfiber wipe which comes with the screen protector.
• Check the placement of the screen protector. Carefully remove it from its packaging. Before you lift its backing, position the screen protector over the screen to see how much margin to leave on each side and ensure clearance of features such as camera spots and microphone holes.
• Remove residual bits of dust with a mild adhesive. Dust is the most important thing to remove from under a screen protector. Lightly dab a sticky note or a dirt clean film all over the screen. Looking at the reflection of a bright area on the screen at an angle will confirm the presence or absence of dust.
• Stick on the screen protector, aligning an edge carefully. Peel back the screen protector's backing from one end (leaving it on the other allows more control by holding that end). Align it with the correct edge of the screen, leaving the margin you determined previously and watching how the alignment of the sides perpendicular to it will fall. Then peel off the entire backing and smooth down the protector.
• Finished! Enjoy your gadget without fear.